TBKMakers Skeletor MK7 K1 ToolHead Duct

Ready to take you creality K1 Machine to the next level?

The Skeletor MK7 cooling duct and skeletonized toolhead designed by TBKmaker (https://www.patreon.com/c/TBKmaker) is that solution!

Never again will you need to use that terrible side auxillary fan for additional part cooling, now you have room for a bento box or other actual carbon filter solution!

Do you have unsightly droppung overhangs and weak bridges on your current K1 toolhead/duct? MK7 is the end all solution to that problem, Utilizing the stock 4020 fan you will be able to proiduce flawless overhangs and bridsges with ease.

So what is the magic of Skeletor MK7? TBKmaker set out to make the absolute best cooling duct solution for the k1 printers. When he set out on his goal was to upgrade the cooling as much as possible utilizing the stock fan; as well as reducing the overall weight of the toolhead. Not ruling out aftermarket fan options TBK conducted extensive testing of the factory 4020 fan, comparing it even with 12500rpm 5015s. But the Creality 4020 outperformed them all in both cfm and pressure. Through 7 revisions TBK perfected the airflow of the duct optimizing every availabe cubic milimeter of space. When he had his duct perfected he found another option to add, and the tripple duct option was born.  But TBK didn't stop there, like many of us he desired to improve his K1 with the cartographer bed scanning probe and SimpleAF firmware. In doing this he realized that he could incorporate a low profile cartographer right into the MK7 duct, for hands down the cleanest instalation available and no loss of bed at all! But if you are already using a right angle cartographer there are options for that as well!

In the effort of maximum compatability TBK went on to design a version compatible with the ever popular BCJ gantry, and of course the normal version is fully compatable with The RetroGlide v3 Gantry system which I also offer for sale.

All version are available with or without probe mounts and both cartographer3d rand beacon are supported.

This set includes

1-Strain Relief

1-Support Arm— specify if you would like the zip tie cable management options on the strain and support arm or not in your personalization.

1-MK7 part cooling duct (please specify in the personalization if you want the original dual nozzle or the new triple nozzle duct)

1-Nozzle LED Mount no led included All heat inserts are pre installed and all hardware is included.

Regular MK7 kits only are available in a single color

Color options-

Black, Blue, Green, Red, White, Grey, Orange, Yellow, Purple, Pink

 All prints will be done in ABS or ASA depening on color. Printed to exactly TBKmakers specs. At this time I am the only Authorized reseller of the Skeletor MK7 toolhead system.